Connect the USB data cable
The USB connector is behind a cover.
The USB data cable is for data transfer only and does not
support charging.
Internet and connectivity
© 2010 Nokia. All rights reserved.
37
To avoid corrupting data, do not disconnect the USB data
cable during data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC with the data cable.
2. When the device asks which mode to use, select
Mass
storage
. In this mode, you can see your device as a
removable hard drive in your computer.
3. End the connection from the computer (from the Unplug
or Eject Hardware wizard in Microsoft Windows, for
example) to avoid damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC Suite
on your PC, connect the data cable, and select
PC Suite
.
To change the USB mode you normally use with the data
cable, select >
Tools
>
Settings
>
Connectivity
>
USB
and
USB connection mode
, and the desired option.
To set the device to ask for the mode each time you connect
the data cable to the device, select >
Tools
>
Settings
>
Connectivity
>
USB
and
Ask on connection
>
Yes
.